Updated on September 16, 2026
A visitor types “heat pump assistance 2026” into Google, clicks on your quote form, then closes the tab as soon as they’re asked for their phone number. Maybe they just read an article about €1 heat pump scams. Or maybe they’ve simply been cold-called three times this week about the same thing. In either case, you lose a lead before you’ve even had a chance to qualify their project.
That’s the crux of the problem in this specific sector: mistrust of energy sales calls is now stronger than the desire to find out whether one is eligible for subsidies. A form that ignores this fact loses leads it should never have lost.
A heat pump or solar panel eligibility form that provides an indicative result in less than two minutes—without requiring a phone number for the very first question—converts significantly better than a form that asks for contact information before even discussing the home. This is the direct answer to the question most installers and renovation grant brokers are asking themselves.
Almost all of the guides I consulted—both French and English—offer the same general advice: “Reduce the number of fields.” None of them go into detail about the order of the questions or the exact moment when the contact request causes the visitor to leave. On this type of form, that moment almost always comes before the phone number question—rarely before the questions about the housing itself (square footage, current heating method, occupancy status).
Since January 1, 2026, the electricity conversion coefficient used in the DPE (energy performance) calculation has dropped from 2.3 to 1.9, according to the French Ministry of the Economy. The concrete result: around 850,000 homes automatically lose their "energy sieve" status (F or G ratings), with no additional work, simply because the calculation method changed.
That’s why it’s a factor that almost no simulation tool uses today. Many homeowners are unaware that their home may have moved up an energy efficiency class without them doing anything—and that switching to electric heating (heat pump) allows them to move up even more classes thanks to this new calculation method. A form that asks, “Do you know your home’s current energy efficiency rating?” before offering a simulation captures the attention of an audience that didn’t realize it was relevant.
And that's not all: this regulatory change renders eligibility estimates calculated before 2026 invalid. A simulator that hasn't been updated will give an incorrect result—this is a point you can highlight directly on the form.
The "€1 heat pump" has generated so many scams in recent years that distrust now comes before curiosity for part of your visitors. A guide dedicated to spotting a heat pump scam lists the same warning signs: sales pressure, quotes inflated before subsidies are deducted, no RGE certification mentioned. This distrust isn't solved with a sales pitch; it is solved with transparency displayed on the form itself: the RGE number, a one-sentence explanation of how eligibility is calculated, and no purchase obligation.
That's exactly what you get with a form dedicated to energy leads : display these reassurance elements directly in the flow, without adding to the number of fields to fill in.
According to Edilead (2026), the contact rate of a heat pump lead drops by about 80% if the first call happens more than 5 minutes after the form is submitted. Conversely, a lead contacted within the very first minutes is up to 21 times more likely to qualify than a lead called back the next day. A national home-improvement company that aligned its form with its callback process gained 15 points in appointment rate.
This figure changes the priority: the form structure matters, but it is useless if the lead then sits in a sales queue. Automatically sending the lead to your sales rep as soon as it is submitted, with no manual re-entry, is often the most profitable lever in the funnel — more profitable than adding another qualification field. It is also one of the most direct ways to lower your cost per lead for good on this type of campaign, where the cost per click is often high.
Not all visitors are created equal. A tenant cannot install a heat pump without the landlord’s permission; an owner of a condominium unit faces different restrictions than an owner of a single-family home. Asking this question about status first, then tailoring the rest of the form accordingly, prevents ineligible visitors from wasting their time—and saves your sales team from having to follow up on leads that will never result in a sale.
That's the role of conditional logic: a tenant is directed to informative content rather than to an appointment booking; an owner of a detached house heated with fuel oil (2.6 million homes in France, according to figures cited by Edilead) is sent straight to the most complete subsidy simulation. To go further on this mechanism, our tips for B2C lead generation describe other useful filters by industry.
A homeowner who checks their eligibility for heat pump subsidies is often planning other work at the same time. If they are buying the property they are renovating, they will also need to simulate their mortgage — and if they are selling an older property to fund the work, a well-built real estate valuation form addresses a distrust very similar to the one described above. In both cases, the speed at which the lead is passed on remains decisive: the sync delay between your form and your CRM can, just like the sales callback, make you miss the window when the prospect can still be reached.
If you're starting from scratch on this type of form, start from an existing template rather than a blank page.
An eligibility form that puts users at ease, provides a quick response, and forwards the lead in real time to your sales team is by no means a complex technical project. It’s a matter of structure: first and foremost, it’s about status; visible reassurance; a response in less than two minutes; and contact information requested only to receive the detailed results.
You can build this flow with Blastform's conditional logic, connect lead delivery to your CRM in a few clicks, and fine-tune the questions based on field feedback. Start for free with Blastform to test this flow on your next campaign.